1. Scope of application
This Installation Manual is suit for the Fiber Optic Splice Closure (Hereafter abbreviated as FOSC), as the guidance of proper installation.
The scope of application is: aerial, underground, wall-mounting, duct-mounting, handhole-mounting. The ambient temperature ranges from -45℃ to +65℃.

2. Basic structure and configuration
2.1 Dimension and capacity

Outside dimension (LxWxH)	370mm×178mm×106mm
Weight(excluding outside box)	1900-2300g
Number of inlet/outlet ports	2(pieces)on each side(total 4 pieces)
Diameter of fiber cable	φ20mm
Capacity of FOSC	Bunchy:12-96 cores、Ribbon:72-288 cores

3、Necessary tools for installation

1	Pipe cutter	4	Band tape
2	Crossing/Paralleling screwdriver	5	Electrical cutter
3	Wrench	6	Stripper

4、The process of installing FOSC
4.1、 In the optical cable opening of the end of the 50mm to keep the strengthening of the reinforcement bar.

4.2、Will need to be fused to disconnect the cable from the middle

4.3、 Install and lock the cable in the cable sheath and attach the cable to the cable.

4.4、 With electrical tape to the optical cable hoop protruding part of the tight.

4.5、Select the outer diameter of the cable slightly larger than the sealing clip ring to cut off. Place the end part of the rubber strip in the middle of the two sealing ring and use the finger to put the glue on the cable. To maintain the natural state of the adhesive tape or a slight force, in order to make the wrapped layers of adhesive layers of clothing, no obvious gap.

4.6 、The cable has been installed on the sealing ring into the connection box and cable port, will continue into the additional support slot box, coiled cable stripping, stored into the connection box before the space in the tower.

4.7、 Cable coil stripping, stored into the connection box before the space in the tower

4.8、 On the first disc groove along the fiber protection groove after hot melt pipe around. In case of need, the remaining length can be as shown in Figure ten word direction coil.

4.9、 To bind the connecting plate on the connecting plate holder with a fixed strap (which is face up) with a continuous disk.

4.10、Close the upper and lower cover in proper order with the box body fastening buckle.

COOKIES

Our website uses cookies and similar technologies to personalize the advertising shown to you and to help you get the best experience on our website. For more information, see our Privacy & Cookie Policy

COOKIES

required

These cookies are necessary for basic functions such as payment. Standard cookies cannot be turned off and do not store any of your information.

analyze

These cookies collect information, such as how many people are using our site or which pages are popular, to help us improve the customer experience. Turning these cookies off will mean we can't collect information to improve your experience.

Feature

These cookies enable the website to provide enhanced functionality and personalization. They may be set by us or by third-party providers whose services we have added to our pages. If you do not allow these cookies, some or all of these services may not function properly.

advertise

These cookies help us understand what you are interested in so that we can show you relevant advertising on other websites. Turning these cookies off will mean we are unable to show you any personalized advertising.

营业执照

隐私政策

Email：bella@mingyangftth.com

Email：david@mingyangftth.com

ADD：No.333 Rixian Road, Cidong Industrial Zone, Cixi Ningbo City,Zhejiang Province, China