Phillips
Products
MY-08D-1
If you are interested, please call us directly for more efficient communication. We will provide you with exclusive VIP services!
Category
Keyword：
MY-08D-1
If you are interested, please call us directly for more efficient communication. We will provide you with exclusive VIP services!
Category
Keyword：
- Details
- Advantages
-
Safety Information
■ Precautions
Before performing any operation, carefully read the instructions and precautions in this document to minimize the risk of accidents. The “Danger,” “Caution,” and “Note” sections of these documents do not cover all safety precautions that must be followed. They provide only general safety precautions for operations. When operating products and equipment, you must comply with the safety precautions and special safety instructions related to the equipment and its use.
■ Compliance with local regulations
When operating the device, comply with local safety regulations.
■ Qualified Personnel Only
Personnel responsible for installation and maintenance must be trained in safe operating procedures and safety precautions before beginning work.
■ Symbols
CAUTION NOTEIndicates a potential hazard or risk of damage, resulting in a decline in product performance or an unexpected outcome 
NOTEKeep the comment described in mind ■ Employee Safety
When handling optical fibers, do not approach or look at the fiber optic outlet without eye protection. Protect yourself when drilling holes. Flying debris can damage your eyes or be inhaled. When working at heights, be careful of falling objects.
Case structure
Herramientas
Measuring tape
Kevlar Scissors
Adhesive Tape
Martillo de goma
Mecha Pared
Hole punch
Gloves
Pipe Wrench
Level
Scoreboard
1. Mount the soap dish bracket on the wall, making sure it is level,
2. Next, install the wall anchors, securing the bracket using only the screws if the surface is wood or metal, or using wall plugs for masonry or concrete. Use a 6mm or 4mm carbide drill bit, depending on the type of hole to be drilled.
2. Mount the CDO onto the bracket and secure it with the small screws provided for this purpose. To install the bottom part, lift the protective cover.
3. Once the installation is complete, begin installing the pre-terminated cable. To do this, place the gain control on the rear connector. Once this is done, proceed with the installation: lift the cover and connect the power cable to the RED port. The outgoing cable will NOT store gain in the CDO; it should be connected to the BLUE connector. After connecting it, close the cover.
4. If necessary and due to LACK OF SPACE, remove the transparent lid; this will allow you to utilize 40% more of the space inside the box. Place the side protectors to seal the openings in the box.
Factory & Warehouse
-
Factory & Warehouse
Factory & Warehouse -
Factory & Warehouse
Factory & Warehouse -
Factory & Warehouse
Factory & Warehouse
FAQ
Q:
How many years have you been in this industry
A:
We have been engaged in this field for 20 years
Q:
What is your usual shipping time?
A:
Our shipping time is usually 3-7 days
Q:
Does your product have warranty service?
A:
We have a one-year main warranty period
Q:
Can we send samples by mail?
A:
No problem, we can send samples for free according to the customer's needs
Inquiry
Please fill in your contact information carefully, and we will provide you with one-on-one VIP service to answer your questions in detail!
PROFESSIONAL FTTX SOLUTION PROVIDER
营业执照
隐私政策
Contact Us
ADD：No.333 Rixian Road, Cidong Industrial Zone, Cixi Ningbo City,Zhejiang Province, China