Overview

Optical fibre cable distribution box is a wiring line device of user distributions in FTTH system, It provides protectio and management, for fiber cable and be used forterminating, cable branching, cross connection.

The closure is available in 2, 4, 6, 8 and 12 port versions with full-size or mini-size DLX® hardened adapters with options for factory installed splitter or CWDM.

It is mainly used for user access point in FTTH-ODN network , it can be divided into indoor and outdoor type according to the installation scenario, and can be divided into distribution type and optic-split type according to the function.

Mini-OTE 300 is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. The fiber splicing, splitting, and distribution can be done in this box, and meanwhile it provides solid protection and management for FTTx network building.

For the environment

1. Operating temperature：-40℃~+65℃

2. Relative humidity：≤85% (+30℃)

3. Atmospheric pressure：70Kpa～106Kpa

4. Protection class:IP67

Cable types

The Mini-OTE 300 is designed for standard flat drop, with or without toning wire, and loose buffer tube and central core tube up to ½” diameter cable. Provisions are provided for shielded cable grounding. Fiber types include single fiber 250 micron, flat matrix ribbon, and rollable ribbon fiber.

For cables that are ½” diameter it may be necessary to remove the plastic ring-strip that is located above the lower gel block, such as 96F.

 Plastic Ring Strip

Cut & Remove For Large Cables

Main Features

1. Made of high quality engineer plastic material (PP),Good mechanical strength, Elegant appearance, sturdiness and durability.

2. Suitable for indoor or outdoor ,wall-mounted , pole installation.

3. Built-in Stacked splice tray, easy for open, the splice tray can be taken down, easy for installation and maintenance.

4. Fiber routing is reasonable.

5. Clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution etc all in one.

Tools and materials required

1. 7/16” wrench – exterior bolt hardware.

2.  3/8” wrench – interior bolt hardware and pole mount bracket hardware or type 216C can wrench - exterior and interior bolt hardware.

3.  Self adhesive felt tape (for ribbon central tube applications only).

4. Flathead #2 screwdriver.

Closure specifications

The Mini-OTE 300 is a unique solution for splicing, termination and pass-through cable requirements in fiber-to-the-x (FTTx) architectures.

1. Terminal is re-enterable, swinging open on a hinge for quick access and easy service  and maintenance.

2. Available with 2, 4, 6, 8 or 12 adapter ports, full-size or mini-size DLX® hardened adapters.

3. Four gel-sealed input ports for express and branch-off cables for butt installations.

4. One gel-sealed input port for express and branch-off cables for in-line installations.

5. Units are shipped with two factory integrated splice trays and a fiber storage tray. Slack cable storage is available beneath the splicing trays.

6. Accommodates field installable splitters (1x2, 1x4, 1x8) and field installable compact CWDMs (2, 4, 8 channel).

7. Max number of splices.

NOTE: Trays intended for single stranded splice only, ribbon to be de-ribbonized and spliced as single strands.

NOTE: Requiresadditional SMOUV holder: SPLICEHOLDER-FIST2-6S45 for holding six splices. Splice holder included in Main Subassembly for all terminal kits except Tap terminals which are designed as Plug in-Play.

Without Splitter or CCWDM

With Splitter and CCWDM

Warnings and caution

1. Fiber optic cables may be damaged if bent or curved to a radius that is less than the recommended minimum bend radius. Always observe the recommended bend radius limit when installing fiber optic cables and patch cords.

2. Exposure to laser radiation can seriously damage the retina of the eye. Do not look into the ends of any optical fiber. Do not assume the laser power is turned off or that the fiber is disconnected at the other end.

Technical Specification

2. Box dimension

Kit contents

For safe and stable use, the product should be installed using the following components found in the Mini-OTE 300 kit.